Bonding Primer

Our bonding primer, very high environmental and technical quality is very easy to apply, very economical, dries quickly, odorless and is perfectly suited to different types of substrates. In addition, this product does not drip or splash, lets the support breathe and allows good humidity regulation.

   Application temperature: +5°C to +30°C.

   Drying time: 2 hours at 20°C.

   Yield: 5 to 10 m² per kg.

   Compliant with standard NF P 74 – 201.

PROPERTIES:

   Ready to use.

   Applicable on new and absorbent substrates: cement screeds, concrete slabs, plaster, anhydrite screeds.

   Fast drying: installation after 2 hours.

   Made with eco-friendly and non-toxic components.

   Non-flammable.

DESTINATION:

•   Interior floor: cement screeds and concrete slabs, anhydrite screeds.

•   Interior wall: plaster, plaster tiles, cardboard plasterboard.

•   Exterior floor: cement screeds and concrete slabs.

RECOMMENDATIONS:

•   The substrate must be dry, clean and sound, not subject to rising damp and solid. It must also be dusted thoroughly before application.

•   Paving and cement screeds must have been laid for more than a month, concrete floors for more than two months. Anhydrite screeds must be sanded and dry.

PREPARATION:

No preparation is necessary on new, dry walls. For old paintwork and difficult surfaces, lightly sand, clean and degrease the wall before applying.

APPLICATION:

Apply by brush or roller in a continuous coat. Wait for complete drying before applying leveling compound or adhesive mortar.